This is a set of four (4) pairs of feet for curved Olympia typewriter cases.
These cases were used with the SM3, SM4, and SM5 typewriters and were typically
colored grey. Each foot comes in two parts; one with pins and one with
receivers.
To install you must first remove the old feet, place the receiver half on the
bottom of the case, open the top of the case, and insert the pin half into the
holes in the receiver half. You will want to add a drop of glue, such as
cyanoacrylate glue (commonly called Super or Crazy glue) to keep the parts in
place. Without glue they may separate.
These spacers are 3-d printed in soft TPU plastic.